Specifications
Scroll tables horizontally to view every column.
| Model information | |
| Production years | 1964 - 1972 |
| Equipment type | Row-Crop tractor |
| Production | |
| Manufacturer | Allis Chalmers |
| Equipment type | Row-Crop tractor |
| Built in | Built in West Allis, Wisconsin, USA |
| Total built | 4726 |
| Original price | $7,172 |
| Allis Chalmers 190 Engines | |
| Engine | Allis Chalmers 4.3L 6-cyl gasoline Allis-Chalmers 4.9L 6-cyl diesel |
| Details | Engine details ... |
| Allis Chalmers 190 Transmission | |
| Transmission | 8-speed two-speed power shift |
| Details | Transmission details ... |
| Allis Chalmers 190 Power | |
| Drawbar (tested) | 65.33 hp 48.7 kW |
| PTO (tested) | 77.20 hp 57.6 kW |
| Details | Performance test details ... |
| Mechanical | |
| Drive | Two-wheel drive |
| Steering | Power steering |
| Brakes | Band actuated disc brakes |
| Cab / ROPS | Open operator station. Factory cab available starting in 1965 with optional heat and air-conditioning. |
| Capacity | |
| Fuel | 48 gal 181.7 L |
| Hydraulic system | 9 gal 34.1 L |
| Hydraulics | |
| Type | open center |
| Capacity | 9 gal 34.1 L |
| Pressure | 2000 psi 137.9 bar |
| Pump flow | 12 gpm 45.4 lpm |
| Steering flow | 12 gpm 45.4 lpm |
| Steering press. | 1500 psi 103.4 bar |
| Tractor hitch | |
| Rear Type | II |
| Type | Allis Snap-Coupler |
| Power Take-off (PTO) | |
| Rear PTO | live *Continuous PTO, the tractor can be stopped via the Power Director clutch. independent (optional) |
| Rear PTO Type | 540 (1.375)
1000 (1.375)
|
| Engine RPM | 540@1940
1000@2136
|
| Dimensions & Tires | |
| Wheelbase | 105 inches 266 cm |
| Weight | 7665 lbs 3476 kg |
| Front tire | 7.50-16 |
| Rear tire | 18.4-34 |
| Details | Full dimensions and tires ... |
| Allis Chalmers 190 attachments | |
| Attachment | front-end loader |
| Details | Attachment details ... |
| 190 Serial Number Location | |
| Location | Serial number on the left side of the tractor, stamped into the flange where the engine and transmission meet. |
| 190 Serial Numbers | |
| 1964 | 1001 |
| 1965 | 2485 |
| 1966 | 8219 |
| 1967 | 13273 |
| 1968 | 19262 |
| 1969 | 23234 |
| 1970 | 25901 |
| 1971 | 29136 |
| 1972 | 31118 |
| Details | FAQ: How to read a serial number table. |
| Belt Pulley | |
| Diameter | 9 inches 22 cm |
| Width | 6.6 inches 16 cm |
| RPM | 1845 |
| Speed | 4347 ft/min 1324.97 meters/min |
| Electrical | |
| Ground | negative |
| Charging system | generator |
| Batteries | 1 (gas)
2 (diesel)
|
| Battery volts | 12 |
| Battery AH | 53 (gas)
95 (gas optional)
135 (diesel)
190 (diesel optional)
|
| References | |
| Publication | Loaders - picking up where the others leave off published in 1979, by Allis Chalmers Detachable Loaders - Ready For Any Task published in 1982, by Allis Chalmers One-Ninety and One-Ninety XT Tractors published in 1967, by Allis Chalmers One-Ninety and One-Ninety XT Series III Tractors published in 1969, by Allis Chalmers It's here! New One-Ninety XT published in 1965, by Allis Chalmers Allis-Chalmers Farm Equipment 1914-1985 by Norm Swinford Operator's Manual One-Ninety and One-Ninety XT Tractors (TM-371A) published in 1964 Operator's Manual One-Ninety and One-Ninety XT Tractors (TM-371A) published in 1970 Operator's Manual One-Ninety and One-Ninety XT Series III Tractors (TM-513) published in 1971 |
Values may vary by engine, transmission or configuration. View source page
Model family
Series map
*Estimated engine power for comparison only.