Transmission
Scroll tables horizontally to view every column.
| Notes | Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing. |
| Transmission options | |
| Transmission | 16-speed partial power shift 20-speed partial power shift 12-speed Allis-Chalmers |
| Transmission | |
| Transmission | Allis-Chalmers Power Director |
| Type | partial power shift |
| Gears | 16 forward and 4 reverse |
| Oil capacity | 29.6 qts 28.0 L |
| Gear configuration | Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
| Speeds | |
| Tires used for speeds | With 18.4x38 rear tires. |
| Transmission | |
| Transmission | Allis-Chalmers Power Director |
| Type | partial power shift |
| Gears | 20 forward and 4 reverse |
| Oil capacity | 29.6 qts 28.0 L |
| Gear configuration | Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
| Speeds | |
| Tires used for speeds | With 18.4x38 rear tires. |
| Transmission | |
| Transmission | Power Shift |
| Type | Allis-Chalmers |
| Gears | 12 forward and 2 reverse |
| Oil capacity | 29.6 qts 28.0 L |
| Gear configuration | Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear. |
| Speeds | |
| Tires used for speeds | With 18.4x38 rear tires. |
Values may vary by engine, transmission or configuration. View source page