Attachments
Scroll tables horizontally to view every column.
| Attachment overview | |
| Attachment | 38" mid-mount mower deck 46" mid-mount mower deck 50" mid-mount mower deck Snowblower Blade Front-end loader |
| Height | Two tillers were available for the 318, a 48-inch shaft drive and a 30-inch hydraulic tiller (optional extension to 42 inch). The shaft-drive tiller required the optional 2000 RPM rear PTO. The hydraulic tiller operated off a separate hydraulic pump that was belt-driven in place of the mower deck. A rear-mounted finish mower was available for the 318, if equipped with three-point hitch and 2000 RPM rear PTO. Three baggers were available. A two-bag (6.5 bushel) Power Flow system had a fan that was belt-driven from the right-hand mower spindle. A three-bag (10 bushel) system had an auxiliary 6-horsepower Kawasaki engine to run the blower. A 13-bushel material collection system used an auxiliary 6-horsepower Kawasaki engine and was available with manual tilt dump or a hydraulic dump connected to a rear hydraulic outlet; it could dump 370 pounds at a height of 66 inches. |
| 38" Mower deck | |
| Attachment model | John Deere 664 |
| Notes | 38 inches 96 cm |
| Width | Total width: 49.7 inches 126 cm |
| Blades | 2-blade |
| Lift | hydraulic lift |
| Notes | right-discharge |
| Height | Cut height: 1 to 4 inch 2 to 10 cm |
| Notes | 100 lbs 45 kg Belt: John Deere M89090 (primary)*-SN555000 Belt: John Deere M71729 (primary)*SN555001+ Belt: John Deere M82538 (secondary) 46" Mower deck John Deere 595/596 46 inches 116 cm |
| Width | Total width: 57 inches 144 cm |
| Blades | 3-blade |
| Lift | hydraulic lift |
| Notes | right-discharge |
| Height | Cut height: 1.5 to 5 inch 3 to 12 cm |
| Notes | 116 lbs 52 kg Belt: John Deere M82718 (primary) Belt: John Deere M41668 (secondary) 50" Mower deck John Deere 1013 50 inches 127 cm |
| Width | Total width: 68 inches 172 cm |
| Blades | 3-blade |
| Lift | hydraulic lift |
| Notes | right-discharge |
| Height | Cut height: 1.5 to 4 inch 3 to 10 cm |
| Notes | 186 lbs 84 kg Belt: John Deere M82718 (primary) Belt: John Deere M41668 (secondary) |
| 54" Blade | |
| Attachment model | John Deere 54 |
| Mounting | front-mount |
| Width | 54 inches width 137 cm |
| Height | 18 inches height 45 cm |
| Lift | 12 inches lift 30 cm |
| Notes | 3.5 inches cut 8 cm 150 lbs 68 kg |
| Lift | hydraulic-lift |
| Angle adjustment | manual-angle hydraulic -angle (optional) |
| 46" Snow blower | |
| Attachment model | John Deere 49 0603M |
| Width | 46 inches width 116 cm |
| Notes | single-stage |
| Mounting | front-mount |
| Lift | hydraulic-lift |
| Notes | 200 lbs 90 kg 47" Snow blower John Deere 47 2752M |
| Width | 47 inches width 119 cm |
| Notes | dual-stage |
| Height | Clear height:23 inches 58 cm |
| Mounting | front-mount |
| Lift | hydraulic-lift |
| Notes | 400 lbs 181 kg |
| 44 Loader | |
| Lift capacity (full at pin) | 400 lbs lift (full at pin) 181 kg |
| Breakout force (bucket) | 575 lbs breakout (bucket) 260 kg |
| Notes | 50° dump 44 inches reach (ground) 111 cm 20° rollback |
| Height | 71.5 inches height (at pin) 181 cm |
| Dump clearance | 21 inches clearance (dumped) 53 cm |
| Weight | weight: 500 lbs 226 kg |
| Bucket width | Bucket width: 48 inches 121 cm Bucket width: 54 inches 137 cm |
| Notes | Bucket capacity: 0.21 cu yd 0.2 cu m Bucket capacity: 0.24 cu yd 0.2 cu m |
Values may vary by engine, transmission or configuration. View source page