Transmission
Scroll tables horizontally to view every column.
| Transmission options | |
| Transmission | 16-speed partial power shift 20-speed partial power shift 32-speed partial power shift |
| Transmission | |
| Transmission | John Deere PowrQuad |
| Type | partial power shift |
| Gears | 16 forward and reverse |
| Oil capacity | 54.8 qts 51.9 L |
| Shift controls / operation | Four ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. |
| Speeds | |
| Tires used for speeds | With 18.4R38 rear tires. |
| Transmission | |
| Transmission | John Deere PowrQuad |
| Type | partial power shift |
| Gears | 20 forward and reverse |
| Oil capacity | 54.8 qts 51.9 L |
| Shift controls / operation | Five ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. |
| Speeds | |
| Tires used for speeds | With 18.4R38 rear tires. |
| Transmission | |
| Transmission | John Deere PowrQuad Plus |
| Type | partial power shift |
| Gears | 20 forward and reverse |
| Oil capacity | 54.8 qts 51.9 L |
| Standard transmission | PowrQuad Plus is standard on tractors with cab, replacing the separate gear shift lever with a push-button gear shift on the range lever. Available in 16- or 20-speed. Clutch must be used to change range, cluthless push-button power shift for speeds. |
| Speeds | |
| Tires used for speeds | With 18.4R38 rear tires. Sixteen-speed transmission has same ground speeds but without E Range. |
| Transmission | |
| Transmission | John Deere PowrQuad Creeper |
| Type | partial power shift |
| Gears | 32 forward and reverse |
| Oil capacity | 56 qts 53.0 L |
| Creeper option | Optional creeper could be added to both the 16- and 20-speed PowrQuad. Creeper is engaged with a separate shift lever that selects between creeper (turtle) and the standard transmission ratio (rabbit). Tractor must be stopped, clutch used, and engine speed below 1000 RPMs to shift in or out of the creeper. |
| Speeds | |
| Tires used for speeds | With 18.4R38 rear tires. |
Values may vary by engine, transmission or configuration. View source page