Attachments
Scroll tables horizontally to view every column.
| Attachment overview | |
| Attachment | 48" mid-mount mower deck Snowblower Blade Front-end loader Backhoe A PTO-driven 50-inch tiller, model 7-1261, was offered for the D-series tractors. The tiller required the three-point and PTO. In late 1977, Wheel Horse removed the Ark 550 loader and Brantly 617A backhoe from their list of approved attachments for the D-160 due to high axle failure rates and warranty claims. |
| 48" Mower deck | |
| Type | mid-mount Wheel Horse 5-1221 |
| Blades / lift | 3-blade with hydraulic lift |
| Cutting width | 48 inches 121 cm |
| Weight | 150 lbs 68 kg |
| Overall width | 61 inches 154 cm |
| Cut height | 1.5 to 3.5 inch 3 to 8 cm |
| 56" Blade | |
| Attachment model | Wheel Horse 6-1142 |
| Mounting | front-mount |
| Width | 56 inches width 142 cm |
| Height | 21 inches height 53 cm |
| Notes | Angling 30° 140 lbs 63 kg |
| Lift | hydraulic-lift |
| Angle adjustment | manual-angle |
| 48" Snow blower | |
| Attachment model | Wheel Horse 6-7452 |
| Width | 48 inches width 121 cm |
| Notes | single-stage |
| Height | Clear height:16 inches 40 cm |
| Mounting | front-mount |
| Lift | hydraulic-lift |
| Notes | 225 lbs 102 kg |
| Ark 550 Loader | |
| Lift capacity (full at pin) | 500 lbs lift (full at pin) 226 kg |
| Notes | 45° dump 24 inches reach (dumped) 60 cm |
| Height | 83 inches height (at pin) 210 cm |
| Dump clearance | 66 inches clearance (dumped) 167 cm |
| Bucket width | Bucket width: 40 inches 101 cm Bucket width: 48 inches 121 cm |
| Brantly 617A Backhoe | |
| Backhoe type | Brantly 617A Backhoe |
| Weight | 775 lbs 351 kg |
| Transport height | 72 inches 182 cm |
| Bucket width | 8 inches 20 cm 13 inches 33 cm 16 inches 40 cm |
| 2-Foot flat digging depth | 72 inches 182 cm |
| Reach from pivot | 108 inches 274 cm |
| Swing Arc | 135° |
| Bucket force | 3000 lbs 1360 kg |
| Dipperstick force | 1560 lbs 707 kg |
Values may vary by engine, transmission or configuration. View source page