Attachments
Scroll tables horizontally to view every column.
| Attachment overview | |
| Attachment | 48" mid-mount mower deck 60" rear-mount mower deck Snowblower Blade Front-end loader Backhoe The 60-inch rear mower required the three-point hitch and rear PTO. A PTO-driven 50-inch tiller, model 7-1261, was offered for the D-series tractors. The tiller required the three-point and PTO. In late 1977, Wheel Horse removed the Ark 550 loader and Brantly 617A backhoe from their list of approved attachments due to high axle failure rates and warranty claims. |
| 48" Mower deck | |
| Attachment model | Wheel Horse 5-1221 |
| Notes | 48 inches 121 cm |
| Width | Total width: 61 inches 154 cm |
| Blades | 3-blade |
| Lift | hydraulic lift |
| Notes | right-discharge |
| Height | Cut height: 1.5 to 3.5 inch 3 to 8 cm |
| Notes | 150 lbs 68 kg 60" Mower deck Wheel Horse 5-0901 60 inches 152 cm |
| Width | Total width: 67 inches 170 cm |
| Mounting | rear-mount |
| Blades | 3-blade |
| Lift | hydraulic lift |
| Notes | rear-discharge |
| Height | Cut height: 1 to 6 inch 2 to 15 cm |
| Notes | 350 lbs 158 kg |
| 56" Blade | |
| Attachment model | Wheel Horse 6-1142 |
| Mounting | front-mount |
| Width | 56 inches width 142 cm |
| Height | 21 inches height 53 cm |
| Notes | Angling 30° 140 lbs 63 kg |
| Lift | hydraulic-lift |
| Angle adjustment | manual-angle |
| 48" Snow blower | |
| Attachment model | Wheel Horse 6-7452 |
| Width | 48 inches width 121 cm |
| Notes | single-stage |
| Height | Clear height:16 inches 40 cm |
| Mounting | front-mount |
| Lift | hydraulic-lift |
| Notes | 225 lbs 102 kg |
| Ark 550 Loader | |
| Lift capacity (full at pin) | 500 lbs lift (full at pin) 226 kg |
| Notes | 45° dump 24 inches reach (dumped) 60 cm |
| Height | 83 inches height (at pin) 210 cm |
| Dump clearance | 66 inches clearance (dumped) 167 cm |
| Bucket width | Bucket width: 40 inches 101 cm Bucket width: 48 inches 121 cm |
| Brantly 617A Backhoe | |
| Backhoe type | Brantly 617A Backhoe |
| Weight | 775 lbs 351 kg |
| Transport height | 72 inches 182 cm |
| Bucket width | 8 inches 20 cm 13 inches 33 cm 16 inches 40 cm |
| 2-Foot flat digging depth | 72 inches 182 cm |
| Reach from pivot | 108 inches 274 cm |
| Swing Arc | 135° |
| Bucket force | 3000 lbs 1360 kg |
| Dipperstick force | 1560 lbs 707 kg |
Values may vary by engine, transmission or configuration. View source page